Login or Register for FREE!
Subelement B
Transmitting Systems
Section 11
Transmitting Systems
The magnetron is used to:
  • Correct Answer
    Generate the output signal at the proper operating frequency.
  • Determine the shape and width of the transmitted pulses.
  • Modulate the pulse signal.
  • Determine the pulse repetition rate.

The magnetron is a type of vacuum tube used in microwave ovens and radar systems to generate electromagnetic waves at microwave frequencies. It operates as an oscillator, producing a continuous wave (CW) output signal at a specific frequency, typically in the gigahertz range.

Microwave ovens, for example, use magnetrons to generate microwaves, which are then directed into the cooking chamber to heat the food. The magnetron converts electrical energy into electromagnetic radiation, and its design allows it to generate the output signal at the desired operating frequency.

Mnemonic: "Magnetron Magic!"

Last edited by kacela. Register to edit

Tags: none

The purpose of the modulator is to:
  • Transmit the high voltage pulses to the antenna.
  • Correct Answer
    Provide high voltage pulses of the proper shape and width to the magnetron.
  • Adjust the pulse repetition rate.
  • Tune the Magnetron to the proper frequency.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following statements about most modern RADAR transmitter power supplies is false?
  • Correct Answer
    High voltage supplies may produce voltages in excess of 5,000 volts AC.
  • There are usually separate low voltage and high voltage supplies.
  • Low voltage supplies use switching circuits to deliver multiple voltages.
  • Low voltage supplies may supply both AC and DC voltages.
This question does not yet have an explanation! Register to add one

Tags: none

The purpose of the Pulse Forming Network is to:
  • Act as a low pass filter.
  • Act as a high pass filter.
  • Correct Answer
    Produce a pulse of the correct width.
  • Regulate the pulse repetition rate.
This question does not yet have an explanation! Register to add one

Tags: none

The purpose of the Synchronizer is to:
  • Generate the modulating pulse to the magnetron.
  • Correct Answer
    Generate a timing signal that establishes the pulse repetition rate.
  • Insure that the TR tube conducts at the proper time.
  • Control the pulse width.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following is not part of the transmitting system?
  • Magnetron.
  • Modulator.
  • Pulse Forming Network.
  • Correct Answer
    Klystron.
This question does not yet have an explanation! Register to add one

Tags: none

Go to 10 Go to 12