Login or Register for FREE!
Subelement B

Principles of Communications:

Section 9

Modulation, Demodulation, AM, FM

What statement best describes modulation?

  • Correct Answer
    Imposing intelligence onto a radio carrier signal.
  • Changing mark-space to 1 and 0.
  • Adjusting the frequency to the optimum band for long distance communications.
  • Converting the carrier from a low frequency to a higher frequency.

Modulation is an (A). Imposing intelligence onto a radio carrier signal.

Disturbing the carrier (hum) signal (frequency) is modulation. This can be done by waves of data, voice, music, etc.

A carrier signal is produced inside of the transmitter by a special component. The signal is a steady hum, having unchanging frequency and unchanging height of waves, also called an amplitude.

The AM modulation modulates the carrier wave to produce above carrier frequency and below sine waves.

The FM modulation changes the frequency of the wave, slowing or speeding the wave cycles.

How Does Modulation Work

Great article from Encyclopedia Britannica Modulation and Demodulation

Last edited by markadlerdallas. Register to edit

Tags: none

What statement best describes demodulation?

  • Detuning the receiver to remove interfering signals.
  • Correct Answer
    Extracting intelligence from the radio carrier signal.
  • Removing atmospheric noise from the signal.
  • Separating the TELEX signals from the voice signals.

Demodulation is (B) Extracting intelligence from the radio carrier signal.

Naturally opposite process to modulation, which adds data, voice, music, etc. to radio carrier frequency, the demodulation suppressed the carrier frequency and only produces the original data, voice, or music and sends it to an output device such as a speaker or sends it to another process.

The demodulation process occurs inside the receiver device, such as a radio, or could be a SDR, software defined radio.

See Wikipedia article Demodulation

Great article from Encyclopedia Britannica Modulation and Demodulation

Last edited by markadlerdallas. Register to edit

Tags: none

Which statement best describes amplitude modulation?

  • The character data from the terminal is changed to audio tones.
  • The frequency is varied in synchronization with the modulating signal.
  • Correct Answer
    The amplitudes in the sideband(s) changes but the radio carrier frequency remains constant.
  • The amplitude of the carrier is changed but there is still only a single frequency being transmitted.
This question does not yet have an explanation! Register to add one

Tags: none

What is the emission designation for MF-HF voice signals?

  • F1B
  • J2B
  • F3E
  • Correct Answer
    J3E

The emission designation for MF-HF voice signals is (D). J3E.

J3E is used by by vessels, planes, and ham amateurs, to transmit voice messages.

J is defined as a SSB with suppressed carrier
3 is defined as a single channel designated for analog info
E is defined for voice or music, not data for processing but for human receiver)

For more details, see Wikipedia article called
Types of Radio Transmissions

Last edited by markadlerdallas. Register to edit

Tags: none

Which statement best describes frequency modulation?

  • Correct Answer
    The information signal changes the radio carrier frequency but the amplitude remains constant.
  • Both the amplitude and frequency are changed by the modulating signal.
  • Frequency modulation is subject to interference by atmospheric noise.
  • High level mixing of the final amplifier signal and the information signal.

Modulation is (A). The information signal changes the radio carrier frequency but the amplitude remains constant.

Disturbing the carrier (hum) signal (frequency) is modulation. This can be done by waves of data, voice, music, etc.

A carrier signal is produced inside of the transmitter by a special component. The signal is a steady hum, having unchanging frequency and unchanging height of waves, also called an amplitude.

The AM modulation modulates the carrier wave to produce above carrier frequency and below sine waves.

The FM modulation changes the frequency of the wave, slowing or speeding the wave cycles.

How Does Modulation Work

Great article from Encyclopedia Britannica Modulation and Demodulation

Last edited by markadlerdallas. Register to edit

Tags: none

What is the emission designation for VHF-FM?

  • F3C
  • Correct Answer
    F3E
  • J2B
  • H3E

Emission designation for VHF-FM (B) F3E

F3E is used by marine radios in the FM mode for voice messages.

F is Frequency Modulation, FM
3 is defined as a single channel designated for analog info
E is defined for voice or music, not data for processing.human)

For more details, see Wikipedia article called
Types of Radio Transmissions

Last edited by markadlerdallas. Register to edit

Tags: none

Go to 8 Go to 10